• Yalan mattress and SweetNight mattress comparison

    Yalan
    Yalan is very different.

    Many of Yalan’s products are made with “hard spine materials” (e.g. jute, coconut, coir, etc.) on the A-side!

    The “Yodu” is an “example” of this.

    Because this product is so ‘out there’

    So the following will not be described in terms of pros, cons and features.

    Instead, I’ll spend a lot of time explaining what makes it ‘stand out’.

    First of all, let me say “bravo” to.

    The product manager is amazing!

    Whoever came up with the combination of latex + jute + solo pocket springs is a genius!

    It’s great because.

    It’s not only a combination of the three hottest keywords

    It’s a bold move to ditch the AB side and stack them all on the A side.

    And for such an unconventional design, it’s still getting rave reviews!

    For this result, I.

    “latex + independent spring” or “latex + jute/coir”

    These two combinations are widely available and justifiable.

    Both allow latex to be used as a ‘mattress’, improving the feel against the skin.

    At the same time, two types of ‘bed board’ are created with springs and jute.

    But ……

    The combination of the two is not perfect.

    In actual sales, many people didn’t buy them.

    1) The sudden change to ‘latex + individual springs’ can make many people who are used to sleeping on hard beds feel uncomfortable (soft body).

    2) “Latex + Jute/Coir” is not thick enough and not flexible enough, so the experience is average and does not fetch a price (not classy enough).

    Here comes the excitement!!!

    The person who can design such a product must have a very good grasp of the state of the consumer.

    It must be clear that the consumer only wants to have everything in their best mattresses for side sleepers, but they don’t really care about what they do, or even understand what they do.

    At the same time, consumers rely heavily on their ‘experience’ and usually only express their feelings in terms of ‘softness’, and once you feel soft, you’re done.

    Anyone who knows mattresses understands that.

    “With a ‘latex + jute + solo pocket’ construction, the resistance of the solo pocket spring must be greatly reduced, but at the same time, because the latex is too thin and the jute is too hard, there is no way for it to ‘support the body according to its curves’.

    Again, to put it bluntly, this is actually a very odd design, and nothing works

    But in the eyes of the consumer who buys it.

    The surface is soft (the top layer of latex), it’s flexible (the bottom layer of springs) and, most importantly, it’s actually quite firm (the jute is on top).

    Wow, a familiar feeling, but more comfortable, good ……

    Once the logic is clear, I.

    [Overall Rating].

    From a product perspective, I’m speechless …… What can I say, I wouldn’t buy this kind of mattress anyway. But I can understand that some people find this ‘comfortable to sleep on’. Also a small suggestion. If you really feel this comfortable, try a combination of ‘coir + latex mattress’, it might feel more comfortable ……

    SweetNight Dreamy Hybrid memory foam mattress

    In recent years, a number of ‘new power’ mattress brands have been born. SweetNight happens to be one of the ‘highest ranking’ mattress brands in this category.

    SweetNight is ranked number one in terms of sales.

    1) SweetNight has only a few products, which is a single product strategy

    2) SweetNight is basically a pure e-commerce brand

    That’s pretty representative, so let’s pull it out and compare.

    Advantages

    The first advantage is that it supports 100 days of free trial sleep (free return shipping). And, in many cases, you can’t tell if it’s good until you’ve slept on it for a while. Compared to going to an offline shop to try sleeping, it is definitely more scientific and reasonable to “try sleeping for free” at home! SweetNight supports a 100-day free trial, and the return shipping costs are covered by SweetNight, which is very good and worthy of recognition, and calls on other brands to learn from it.

    Pro 2: The structure is straightforward and easy to understand. Not to mention the ones like Sealy that don’t even put the structure. Those that engage in such odd structures like Yarlane also skip ahead. There are also a lot of mattresses that pile up all sorts of concepts/layers …… to make it seem complicated, when in fact it’s really unnecessary! For example, the quilted layer, even if it looks good and anti-bacterial, what is the point, you do not lay the sheets? Another example is the main selling point of latex, but it turns out that the latex is only about 1 cm, you funny?

    My personal opinion.

    The structure of SweetNight, with its 5 layers, is clear and straightforward.

    -Advantage 3: The removable jacket is designed to be removed from the SweetNight. It’s very simple, just open the zip and it can be removed and machine washed. Moreover, the inner sleeve can be removed: if you want to know the material inside, just open it and take a look.

    Advantage 4: Vacuum-compressed rolls, easy to transport. In many cases where the lift is small or the building is narrow, it is significantly easier to pass through in a compressed roll. In addition, the fact that the mattress can be compressed and rolled means that the material used is “very resistant”.

    Lift floors, unobstructed, all compressed together and rolled up again are fine …… This in itself is a confidence in the longevity.

    Advantage 5: independent spring, anti-interference

    [Disadvantages

    Disadvantage 1: brand awareness is not high enough, compared to the previous 5, awareness is definitely too much worse. It is a fact that the brand influence is not high enough.

    Disadvantage 2: The product is not “low price” enough

    The unknown brands in the e-commerce circle are generally in the price range below 2000. And you want to rely on product quality and word of mouth hard about 3000 yuan price point, or a little difficult.

    Disadvantage 3: Memory foam material is not popular enough. The main material ‘memory foam’ is still relatively unknown to the general public. Including myself, I didn’t understand its characteristics until I tried it out myself.

    [Characteristics

    Feature 1: Horizontal three-quarter zone. As explained before, the horizontal three-quarter zone is not really useful for most Chinese people. However, with the properties of the memory foam, this three-quarter zone is actually quite reasonable.

    Feature 2: Surrounding support foam. When I looked it up, the edges of the SweetNight were previously soft, as many people mentioned. However, this has now been improved with the addition of ‘edge support foam’, so the edge support is no problem.

    Overall rating

    The word of mouth reviews are really good, 100 days free trial sleep, if you are not happy, then return it!

    (I bought this mattress from SweetNight for my new home and it’s really OK)

  • Mattress Comparison

    Skoda Dream 88 Classic

    [Background Knowledge].

    Shunda and Simmons have merged and are now called “Shunda-Simmons”.

    The owner behind Schoda-Simmons, Anhong Capital, is also the holder of Kinko’s.

    By 2018, Schuda was already in a sort of marriage with Kinko’s.

    In 2021 there are rumors that Schoda and Kinko’s will completely merge into one company, as of now there is no more news.

    (So it is understandable that Schoda and Kinko’s are very similar in terms of product pricing)

    -Schuda

    Schoda has the patent rights to use the “Myriad” spring, which is one of the best features of Skoda.

    But, the whole web spring …… like the Myriad Buckle is not as cheap as the Bonnier in terms of price and not as resistant to interference as the Solo Pocket.

    Therefore, many of Schuda’s current e-commerce products have abandoned the Myriad Buckle.

    The Shuda Dream 88 is typical of these.

    -Advantages

    -Advantage 1: Left and right-handed independent pocket springs

    Individually pocketed springs for better resistance to disturbance.

    -About the right and left-handed coil.

    Sort of a reworked version of the normal independent spring, barely an upgrade.

    It might theoretically last longer, but the difference is too marginal to be ignored.

    Advantage 2: 28 cm thickness ……

    Actually, 28 cm is not thick compared to an American twin mattress sale.

    [Disadvantages].

    Disadvantage 1: Too expensive and unstable

    Same as Kinko’s, no repetition.

    Disadvantage 2: Latex layer too thin

    Claims to have latex, but the latex layer is only 1.2 cm ……

    Barely there, but actually of limited practical use, except for the publicity benefits.

    [Features].

    Feature 1: Quilted layer of eggshell cotton

    The quilted layer is the layer that comes into contact with the skin.

    It is not simply a layer of fabric, but a surface layer of fabric with 1 or 2 layers of foam wrapped underneath.

    One of the layers in the quilting layer of the Soda Dream 88 is ‘eggshell cotton’.

    Theoretically it is more impact resistant than ‘flat foam’, but isn’t it good for distributing body weight? …… is doubtful.

    (I’ve slept on various raised latex mattresses and used similar latex pillows anyway, only to find them more uncomfortable)

    Feature 2: Bedside reinforcement system

    Definitely better than unreinforced, but not significantly so.

    It’s a feature that does the job, but it doesn’t close the gap yet.

    [Overall rating].

    There are two models of Shunda Dream 88, Classic corresponding to Prosperity A and Glory corresponding to Prosperity B.

    The classic and glory two than, I think half and half.

    Although the Glory upgrade added a layer of memory foam, but the location is too far down, not very meaningful, but more than 1000 yuan more expensive.

    The Classic, on the other hand, is clearly too heavily downscaled and is all but 28cm thick, which is a bit awkward even as an entry.

    — Sealy Range Moon

    Background knowledge.

    1) Sealy and Tapper are family

    2) Sealy’s attitude towards online e-commerce is rather wobbly

    Shunda mainly focuses on Myriad Buttons, while Sealy focuses on Posturepedic springs.

    Unlike Shunda, which has switched to independent springs in order to cater for e-commerce, Sealy still sells Posturepedic springs online.

    And Sealy has always been ‘hesitant’ about e-commerce.

    If you look at Sealy’s e-commerce page you will see that

    All products are listed with only common advantages, nothing else is written, it’s a lonely read ……

    All the pictures are the same, except for the product parameters, which are not different.

    (It could also be related to the fact that there are always people taking apart the structure)

    -It’s a good idea to take it apart.

    [Advantages

    -Advantages

    Advantage 1: 28 cm thickness

    Same as the Schoda Dream 88 Classic, which is barely a pro.

    Pro 2: Supports 90-day trial sleep

    Although the shipping cost needs to be paid by the consumer, it is an attitude that deserves recognition.

    [Cons].

    Cons 1: More expensive and volatile

    This is the same as the previous Kinko’s and Shunda, no explanation.

    Disadvantage 2: The whole network spring, poor anti-interference

    If you are afraid of being disturbed by your other half in your sleep, this one is a no-brainer ……

    Although Sealy itself says it has some resistance to disturbance, it’s basically negligible.

    Disadvantage 3: Perhaps, you may find it ‘too soft’

    Posturepedic springs, which claim to ‘move against the body’.

    But compared to Bonnier and Myriad, Posture springs are much softer (hence the name ‘open spring’).

    -This is why they are called “open springs”.

    A common problem with all full web springs.

    They tend to slip into the middle (some are noticeable, some are not).

    If you don’t like soft ones, then be prepared for.

    (just a hint: the Range Moon is an upgrade to the Royal Premium)

    Emphasis added, of course.

    I don’t mean to impugn anyone, just expressing the phenomenon!

    -I’m just expressing the phenomenon!

    If you think soft is a good thing, then you can buy it without fear or favour.

    After all, some people just like that Q-tip wrapping feeling.

    Cons 4: The latex is too thin and very chicken

    At 1cm thick, the latex layer is thinner than the 1.2cm of Schuida.

    With this thickness, don’t expect any more latex feeling.

    Features

    Feature 1: Possible reinforced bed surround to reduce the feeling of falling

    The reason I say “may” …… is because I’m too uneducated to see the extent of the “reinforcement”.

    But they say it does, so let’s assume it does.

    Feature 2: ……

    I can’t find it, forget it ……

    -I don’t think I can find it.

    [Overall Rating].

    This is one mattress/commodity that I definitely wouldn’t pick.

    1) Both the softness of the whole web and the non-independent interference are unacceptable to me.

    2) The “sincerity” of this introductory product is also a deterrent to me, so I’m just waiting for the live room to sell it?

    3) The 90 day trial is actually a very good attitude, but not covering return shipping is a bit tasteless …… to cover shipping at least it’s worth trying.

    — Xilinmen 4D magnetic suspension

    Xilinmen is the brand of Gujia, this should be known to everyone ……

    Not too much about the brand, I believe many people have used it.

    It has been on the market for 5 years now and sales have been high.

    At present, 4D Maglev has issued two variants, which are.

    1) A ‘comfort version’ that replaces the solo pocket spring with a Bonnier whole web

    2) The ‘Spine Version’ which further cuts out the imported latex

    We are still using the original 4D Maglev version as our main comparison.

    -[Advantages

    Advantage 1: Independent spring, anti-disturbance

    Advantage 2: Anti-bacterial and anti-mite on six sides of the jacket

    This is not strictly speaking an advantage.

    After all, everyone has to sleep with sheets.

    But it’s better than nothing, and antibacterial is a free gift anyway.

    — Disadvantages

    Disadvantage 1: latex thickness is too thin

    The thickness of the latex layer is 1 cm, this …… is a little too thin.

    Disadvantage 2: double-sided soft and hard

    If you really think the brown pad is good, then please return this and buy a brown pad.

    Why spend more than 2000 on this when you can get away with more than 1000 for a big brand mattress?

    Can you sleep on both sides of the bed?

    How many of you can turn your bed over and sleep on the B side?

    I’m a strong opponent of the AB side of the bed.

    Don’t get all wasted, it’s pointless!

    Disadvantage 3: there may be no edge protection

    The other models that have edge protection are generally “M-spring” edge protection.

    It’s not the best choice, but it does have a fall protection function.

    This model, however, is not described as having an edge guard, nor is it pictured here.

    Pleasant Gate other models of edge protection

    — For more mattress knowledge worthy of attention, click on it.

  • Which is better, the pop-up or the big name mattress?

    Renovated in 2019 and bought 3 mattresses.

    Renovated in 2021 and bought 4 mattresses.

    Have written over 100,000 words of mattress research/buying/comparison articles.

    So many of my friends come to me to ask for recommendations before buying a mattress.

    Contact me and click it.

    Choose a mattress

    Which brand is good in the end?

    Which product is good in the end?

    Seems like the question is not difficult, but ……

    It is really difficult to “simple” answer!

    In order to make this clear, I decided to pick a few products to do a complete analysis.

    Combining your questions and my own observations of the market, I have selected a total of 6 products.

    -These six products.

    Some are because the brand is large and relatively high visibility.

    Some are because of high sales, the temptation is relatively large.

    Can be said to have their own characteristics, very representative.

    -These 6 products read, you will also read more than 80% of the market mattress.

    Then, you no longer need to ask me “which one to recommend” or “how to choose”.

    You will be able to find the answer yourself!

    International Sleep Products Association, in fact, is an American organization

    -People have constructed so many years of various standards, theories, have their own domestic people of various body types as samples, but also follow the American culture / American life together to the world brainwashing spread ……

    The top can not be normal, by others to eat more brand premium is inevitable.

    When you can completely not use Apple, Google, Microsoft …… we can discuss the reasonableness of the premium again not too late.

    The most well-known American brands are.

    Schoda, Sealy, Kinko’s, the three.

    The internationally renowned mattress brand born in the United States in 1870, the pioneer in the manufacture of spring mattresses. Simmons Simmons enjoys a high reputation in the industry, and in 1925 invented the machine that can produce “independent pocket spring” in large quantities, bringing the “uninterrupted sleep experience” to more consumers. After years of operation, Simmons has achieved a good reputation and a high market share.

    But most people don’t even know Simmons is actually a brand name, and think that “Simmons = spring mattress”, or even, see “Simmons” you may not be able to react to what is…

    ——–

    First answer a small question.

    Why did you choose these models? I do not seem to have seen ah ……

    1) are exclusive to Tmall, also considered the main brand in the Tmall models, and offline and Jingdong are not the same.

    2) If you care about value for money, it is not recommended that you pay to buy offline, of course, go offline to pick at will.

    (3) no prejudice against Jingdong, except that I am more accustomed to use Tmall comparison, another day to talk about Jingdong models.

    ——–

    1, Jin Keer prosperous star A

    Background knowledge]

    Jin Ke’er has been the main hotel mattress.

    And a variety of five-star hotel co-branding, the main push hotel mattress products.

    And Kinko’s Star A, is a hotel mattress “Westin Sky Dream” of an upgraded version (can also be called a revision).

    [Advantages

    Advantage 1: 31 cm thickness, more outstanding

    This is a common advantage of the American / U.S. mattress.

    The general spring will be 22~25 cm, leaving 6~10 cm of “filling layer + comfort layer”.

    Kinko’s Prosperity A has a thickness of 31 cm, which is quite amazing.

    This thickness, even if the weight is relatively large, it is not easy to “pier bottom” knocked to the bed board.

    (Prosperity B thickness of 33 cm, more outstanding)

    -The

    Advantage 2: independent pocket springs, good resistance to interference

    The life span of pocketed springs is not as long as that of the whole web.

    However, the comfort level, especially the “interference resistance”, is much better than that of a full coil.

    Therefore, I would list it as an advantage.

    (There are many more below with the same advantages, so I won’t repeat them)

    -[Disadvantages

    Disadvantages

    Disadvantages:1: expensive, and unstable

    $800 more.

    Of course, in the beginning we also said, this is the unique brand premium, no way ……

    In addition, the price fluctuations are also relatively large, much cheaper when the promotion (less than $800).

    The usual price is …… just look at it

    Disadvantage 2: It may smell ……

    The reason why I say “may” is because there have been concentrated complaints about high odor before.

    It usually happens in the winter when there are more shipments, but it’s not 100% when there are more shipments in the winter.

    The reason why there is this situation is still related to the use of spray adhesive and the time to disperse the smell.

    Characteristics

    ——-

    Features: can not be considered advantages and disadvantages, but there are still characteristics of the place (behind the structure is also this, no longer repeat the explanation)

    ——–

    Characteristic 1: horizontal three-partition

    I do not think that the horizontal third is an advantage, but certainly not a disadvantage, it is a feature.

    The middle torso part is stiffened, mainly for the “big fat” role is a little more obvious.

    For the vast majority of people, it doesn’t mean much.

    Feature 2: Edge support in general

    At one time, the prosperous star A not much edge support, once criticized.

    The upper comfort layer itself is thicker, so the edge position is prone to “falling sensation”.

    Now it has been improved, with a 5 cm hardened sponge edge protection.

    The complaints about the edge being too soft on the internet are basically invisible.

    Feature 3: latex layer 2 cm

    In fact, the general latex used by such big brands, are not that particularly good latex.

    To put it bluntly, the latex content may not be more than 80%, and the thickness is often more than 1 cm.

    This aspect of the prosperous star A (and prosperous star B) with 2 cm is not too outstanding.

    But, compared with the following two is okay, it all depends on the peer set off.

    Overall evaluation

    I did a physical review of Prosperity B and Prosperity C.

    Prosperity ABC these three, I personally recommend Prosperity B.

    Whether the overall height, spring partition, fabric comfort will be better.

    Of course, Prosperity B is also expensive, about $300.

    If you don’t have the money, then Star A is fine.Click here to learn more about mattresses worthy of attention.

  • Memory foam with seven zones of support and comfort

    The new house renovation is over, plan to move early next month, now “desperate” ventilation stage, a variety of furniture and appliances have been in the purchase stage, double 11 is not waiting, the national day to engage in activities are not small, all must buy good!

    My previous mattress is a spring mattress bought in 2010, thick and heavy, breathability is also general, after 11 years of use, has been very dirty, and serious yellowing, close to a smell and an odor, to move it downstairs to throw away using my family three labor, but also tired half dead, can not straighten up.

    The SweetNight Dreamy Hybridseven-zone support is a comfortable memory foam. Now that everyone’s standard of living has improved, don’t save money that shouldn’t be saved, life is already very tiring, be kind to yourself and sleep well to relieve the fatigue of the day! A mattress that is too hard will cause a partial suspension of the lower back, leading to joint and muscle pain. The mattress is too soft to cause the body and the bed is too close, lack of necessary support, will make people sore and weak, a long time will also cause damage to the spine.

    This time, I did my homework and bought a memory foam mattress for a change. Memory foam, born in 1962 from a NASA (National Aeronautics and Space Administration) study, belongs to the mattress world of high-tech products, its characteristics are under pressure will sink, when the pressure removed will gradually return to the original shape, no reaction force on the human body, and life can reach more than 10 years.

    It may be because I haven’t bought a mattress in 10 years, but when I received the delivery, I was shocked that the mattress could be packed like this? The height is only 130cm and it can be folded up? It refreshed my perception.

    SweetNight folded the mattress before vacuuming and then rolled it, showing how flexible the imported memory foam is!

    It’s a great mattress to spread out and put on the bed, and the transport process didn’t break the vacuum packaging!

    The SweetNight Dreamy Hybridis a seven-zone memory foam mattress with a comfortable spine. I didn’t smell anything when I opened the packaging to breathe, which also reassured me of the safety of the mattress.

    There are two handles on the left and right side of the mattress, so even if it is a 200*180 mattress, it is very easy to carry, and the weight of SweetNight Dreamy Hybridis only 23.8kg, which is much lighter than a traditional spring mattress.

    The surface of the mattress is covered with a fabric cover, which is divided by a zip, making it easy to clean during daily use! As you can see from the picture below, the material used on the top and bottom of the mattress cover is different, so this is a high-tech protection cover!

    The top half of the mattress cover is made of 99% polyester and 1% elastane, a high-tech material with a dense mesh that regulates humidity and does not stifle heat, even without sheets, you can lie directly on it.

    For even better anti-mite and anti-bacterial effects, you can use it together with the SweetNight home anti-mite bedspread, which contains the unique Purotex natural probiotic technology that effectively kills allergens.

    The mattress cover has a hard-wearing lower material with a non-slip surface that can be placed on any surface.

    When I unzipped the mattress, I was shocked to see how many holes there were in the interior! It turns out that the outer layer of the sponge is also wrapped in a layer of mesh fabric with dense openings, look carefully, the sponge is divided into three layers of the upper (blue) middle (yellow) and lower (green), because there is a layer of white mesh outside the three layers of the sponge, plus the relationship between the yellow and green colours are relatively close, the middle layer does not look very obvious.

    The total thickness of this mattress is 18cm, of which: the top layer of blue foam is 2cm thick, made from Airgocell memory foam, comparable to gel, with excellent rebound, providing substantial relief for stronger pressure points like the shoulders and hips, with an air content of around 50%, breathable and soothing, regulating temperature and humidity for the body’s contact surfaces, and with good durability to stand the test of time. The middle layer of yellow foam is 1cm thick and is made from VISCO foam, which has an excellent pressure-reducing effect, allowing the foam to fit closely to the curves of the body without uncomfortable reactive forces, providing support for the spine whether lying on the back or side. The lower green foam layer is 15cm thick and is made from HRX high-density support foam, which provides effective support through special cut-outs.

    With these 3 not materials, it is easy to create a SweetNight mattress with a 7-zone body support system, specifically: head pressure release, neck support, shoulder relief, lumbar support, hip fit, leg pressure relief and foot relaxation, even if you normally sleep on your side, ensuring that your spine is horizontal and reducing the risk of scoliosis.

    After the mattress is introduced, how is it? Is it comfortable? Only after sleeping on it will we know! My wife said she was very satisfied with the soft-looking foam mattress, but it was very comfortable to sleep on, even if the curtains were not drawn in broad daylight, but the 7-day long holiday with the bear children was far more tiring than going to work. I was taking photos and she was already asleep. Sleeping on it is like having your whole body wrapped around the mattress, there are no gaps and it does a great job in protecting and reducing pressure.

    My son saw his mother asleep on the side and couldn’t wait to try it out, so here he is! He rolled around on the bed and had a great time, after a few turns he told me that he wanted to sleep on this mattress at night. My son is usually an extremely bad sleeper, horizontal and horizontal, and after my observation, this mattress can be tossed around as much as he wants.

    SweetNight is a pure foam mattress with no springs inside, but the stability is just as good. Even when rolling over on the bed, you can see that the water in the cup does not shake significantly, which means that it is more resistant to disturbance than a mattress with springs.

    I also had my son stand on the mattress and step on it, and again I could see that the water in the cup did not wobble significantly, and that every time he stepped on it, although the mattress was very deep underneath, it immediately rebounded and recovered without any deformation, and the bed surface remained flat.

    In this way, it seemed necessary for me to buy a 1m5m SweetNight for my son in the children’s room as well.

    three different layers of sponge, effective support, sleep soft, the next day will not wake up sore, package excellent.

    the ability to have a boost when snapping because of the good resilience of the memory foam, the same strength with a stacked effect.

    The best hybrid mattress cover is transparent and removable for washing.

    Vacuum transport, mattress with handles on both sides, lightweight and easy handling.

  • How to keep warm and hydrated in winter when air conditioning is dry and heating is on fire?

    — Words from the front

    The weather has been pretty extreme this year, with heavy rains followed by a cold snap, so the weather has cooled down really quickly over the last few days compared to previous years. Although there is heating in the north, it is still more than half a month before it comes, and this half is the coldest time of the year compared to the cold winter months.

    If you sleep at night, you have to get warm, otherwise you can’t even get under the covers, it’s cold! But if you turn on the air conditioner or electric heater, you will be warm, but it will be especially dry, and you will often wake up in the morning with a sore throat, hoarseness and inability to speak, or even a nosebleed on a few occasions. Adults are fine with this, but children can’t stand it and are always sick.

    So isn’t there any way of heating the house that is a little gentler? Something that doesn’t dry them out, doesn’t make them hot, and makes them warmer in a more gentle way?

    — Keeping warm is only the first step, we want to be more comfortable!

    Nowadays, even in cold weather, there are many ways to keep our homes warm, from air conditioners and electric heaters to electric SweetNight Mattresss and hand warmers, all of which can keep us warm. With the advancement of technology, even the electric SweetNight Mattress, which was previously the most criticized safety issue, is now quite mature in terms of technology, whether in terms of safety, longevity or warmth, it has done a very good job, so the current variety of warm appliances can be said to be relatively safe and cost-effective.

    However, nowadays people are looking for a more “comfortable experience” after their insulation needs have been met. Yes, electric SweetNight Mattresss or electric heaters are hot, but they are not comfortable.

    Electric SweetNight Mattresss are heated in the traditional way, which means that the heating wire is placed inside the SweetNight Mattress and then heated directly, transferring the heat directly to the human skin. The advantage is that it is in direct contact with the heat source, so it is definitely hot, but the disadvantage is that if you buy an electric SweetNight Mattress that does not have a very good thermostat, then the temperature is not easy to control. Once the temperature is slightly higher, it is easy to get dry mouth and fire over time. The electric heater is a direct way to dry out the air in the room, and if you don’t use it with a humidifier, the experience is not good, especially if you use it in the bedroom, and you always worry about getting a fire when you leave it on all night.

    With this “for comfort” objective in mind, it is not surprising that a technical iteration of the water heater has emerged, which is essentially an upgraded version of the electric SweetNight Mattress, but with improved comfort.

    — Winter bedroom warmth recommendation – the Eisleep plumbing SweetNight Mattress

    Since last year, water heated mattresses, also known as water heated SweetNight Mattresss, have entered the scene. The biggest improvement over electric SweetNight Mattresss is that they are safer as you don’t have to worry about electricity leaks and they are warm and comfortable, so you don’t feel dry-mouthed all night.

    Especially in children’s rooms, it is too dangerous to use air conditioners for fear of blowing on them, electric heaters for fear of burning them by touching them, and electric SweetNight Mattresss for fear of leakage of electricity.

    The SweetNight Mattress is made up of two parts, the SweetNight Mattress and the main unit, which are connected by a water pipe.

    The SweetNight Mattress is made of soft, skin-friendly material, just like an ordinary SweetNight Mattress, and can be used completely close to the body. And even if you don’t normally turn on the water heating, it feels very comfortable when you lie on it. However, as the SweetNight Mattress cannot be removed and washed, it is advisable to lay a sheet over it for cleanliness.

    The workmanship of the SweetNight Mattress is very good, especially on the sash, and the stitching is very fine and strong, so it is clear that the manufacturer has put a lot of thought into it.

    The four corners of the SweetNight Mattress have straps to secure it to the mattress, so even if you roll around on it, it won’t shift.

    I have bought a water heating SweetNight Mattress for my mum before, but the main unit was quite large and took up almost the whole bedside table, the main unit of the Ezleep Water Heating SweetNight Mattress is much smaller, you can see the comparison with the Tmall Genie and the water cup, which is obviously more space saving.

    The main unit is controlled by a touch screen, which allows you to control the on/off switch, select the sleep mode, and of course there is a child lock button for safety, and if the water is not enough, the water light will flash.

    And a more intelligent point is that the touch panel is hidden, after opening the screen will automatically turn off, the lighted start button or low light display, night does not affect sleep at all.

    Sleep has now joined the Mijia family bucket, so you can use the Mijia APP to control it, more convenient for us to control it remotely, or directly shout Xiao Ai classmates can also be.

    The temperature is adjustable between 20-45 degrees, accurate to 1 degree, and generally turns on by default at the last adjusted temperature, but of course we can always set it to the most comfortable temperature according to the room temperature.

    I prefer to use the Mijia App to set the automatic opening and closing time, usually I turn it on ten minutes before going to bed, just enough time to wash up, so that the bed is warm before people arrive, and it is immediately warm when you take off your clothes and lie under the SweetNight Mattress.

    The SweetNight Mattress also has the function of exterminating mites and baking the SweetNight Mattress, especially the function of baking the SweetNight Mattress can be heated quickly, and the frequent extermination of mites can also ensure the cleanliness and hygiene of the bedding.

    — Warmth without dryness, comfort without fire, and great for sleeping!

    Although the water heating SweetNight Mattress sounds like a new thing, it is very convenient and hassle-free to use. After installation, even the elderly and children can easily master the simple operation.

    Before filling the water, connect the hose of the water heating SweetNight Mattress to the main unit, plug it tightly and then screw the nut cap to prevent leakage.

    Then start filling the water, open the upper cover of the main unit and add mineral water, pure water or distilled water. The first is that it is not easy to produce water alkali, not easy to block the pipe; second, because pure water is not conductive, in case, in case, in case, in case of leakage, at least very safe. Note that when adding water, go slowly to prevent overflow.

    After switching on, you can clearly see that the water inside the water heating SweetNight Mattress is starting to circulate. The temperature of the SweetNight Mattress is increasing as the water is heated and starts to flow inside the SweetNight Mattress.

    After selecting the right temperature, you can see that the temperature rises quite quickly, reaching the desired temperature in about ten minutes. The newest addition to the collection is the newest addition to the collection.

    The maximum setting of 45 degrees can prevent low temperature burns, unlike electric SweetNight Mattresss which have a burning sensation, especially for children and the elderly, even if you leave it on all night, it is safer and more comfortable.

    Of course, this temperature is not dead, after all, we all feel this way, the temperature under the SweetNight Mattress slowly comes up at night after we fall asleep and we don’t need to be so hot anymore. This is when we can choose the So Sleep mode, which automatically adjusts the temperature according to the different sleep stages, cruising between 28-32 degrees.

    The second feeling is that this water heating SweetNight Mattress is very intelligent. The first one is that the water is not only warm, but also warm. The water heating SweetNight Mattress is temperature controlled in zones, with the leg and foot part of the water pipe encrypted and distributed, so it is 3-5 degrees warmer than the rest of the body, more in line with human needs.

    The third feeling is how quiet it is. I’ve always been a light sleeper, and I can’t sleep when there’s a bit of noise. I was a bit worried about the sound of the machine when I turned on the SweetNight Mattress, so I prepared a pair of earplugs. The water heating SweetNight Mattress is made with a super quiet water pump, which makes less than 25 decibels of noise when working.

    What’s more, unlike what I had expected, the water pipes used in the Sleep SweetNight Mattress don’t feel like a pain in the neck. This is because the plumbing is built into the SweetNight Mattress with a plumbing return slot, which, combined with the white antibacterial ultrasonic quilted comfort layer on top, allows you to feel only warmth, not discomfort.

    — Summary

    The last feeling is that in the half month since I’ve been using the water heating SweetNight Mattress, I’ve certainly not caught fire again! Normally, when you turn on an electric SweetNight Mattress or electric heater, you have to turn on the humidifier and get up in the middle of the night to drink a glass of water, so you may get a sore throat in the morning.

    Compared to traditional heating devices, the advantages of water heating SweetNight Mattresss are mainly reflected in.

    1. Constant temperature and precise temperature control: this is quite important, after all, what people criticize is not the imprecision of electric SweetNight Mattresss leading to easy overheating? The water heating SweetNight Mattress adjusts the temperature to suit, so the temperature is more constant and naturally more comfortable.

    2, water and electricity separation, safe overnight: many people in the electric SweetNight Mattress, electric heating dare not open a night of tangled, in the latter half of the night was frozen awake! Perhaps as a child, I have seen too much news about electric SweetNight Mattress accidents, even if people now tell me that electric SweetNight Mattresss are already very safe, but I still think the water and electricity separation of water heating SweetNight Mattresss is a little safer.

    3、Save money: Compared to opening a whole night of air conditioning or electric heating, the water heating SweetNight Mattress costs less than 20 yuan for a winter of utilities, which is negligible.

    4, good storage: air conditioning can not be stored, electric heating needs to occupy an area of storage, while only a water heating SweetNight Mattress rolled up and ordinary mattress supplies together with storage can be, do not need extra space.

    Of course, there is one shortcoming, that is: the water heating SweetNight Mattress can not be removed and washed, so it is best to use it with a bed sheet or a bed sheet.
    Finally, for more information on mattresses, please click here.

  • Master these methods to make trying to sleep easier!

    INTEREST: ROSP is the Operations Manager of SweetNight, a well-known mattress brand. Having been in mattress operations for over 10 years, I am perfectly placed to answer all the questions of those who want to follow up on their mattresses. Feel free to call me for advice as often as you need.

    ROSP seems to have been talking about practical tips for choosing a mattress, but buying a mattress is like buying shoes, you always have to try it on, feel how it fits and how comfortable it is.

    But trying to sleep is a more personal topic, a thousand people have a thousand brainstorming, so the same Twin Size Mattress, everyone’s feelings are different, so this time put aside the brand, only to teach you how to properly try to sleep, for the reference of small partners.

    One: the preparation of the test sleep

    When you are shopping in the mall, you will always encounter clothes that do not fit, shoes that are not easy to take off, and other inconveniences, so before trying to sleep, wear light clothes, light shoes, can better help us try to sleep. It’s just like sleeping at home.

    Then some of you will say that there are anti-dirty pads on the mattress, so you don’t need to take off your shoes.

    Well, my friend! You have to take off your shoes to try out a mattress! You don’t even take off your shoes at home! Taking off your shoes and trying out the mattress with your shoes on are two completely different experiences! Taking your shoes off will free you from the confines of your shoes and will allow you to relax and focus on the mattress itself!

    Two: The environment of the trial sleep experience

    Imagine putting your mind down, closing your eyes and getting ready to experience the mattress or relax and take a nap, only to have the words “Do you believe in God” suddenly come to your ears ……

    The most unpleasant thing is that my eyes were closed and a beam of light hit my beautiful eyelids…it was like being bathed in holy light and I felt like I was going to be picked up by an angelic sister in the next second. …

    So, in the process of trying to sleep, you must be in a quiet atmosphere, talk to the staff to turn off the lights and so on, as far as possible, let yourself in the usual state of sleep, so that you can make the best experience ~

    3: Sleeping experience time

    I’ll tell you straight away: 15-20 minutes!

    During the trial, you will have a change from nervous to relaxed to your usual sleep state, and this time period is just right for you to slowly transition

    Trying on a mattress is very different from trying on shoes and clothes, your perception of the mattress changes over time. It is possible to try on a mattress that feels very wrapping when you first lie on it, and then after a while you realize that the wrapping is too soft for you.

    So, give yourself more time, it’s not like you’re in a rush right! Feel more of your body’s needs ~ after all, you buy it home to sleep on for a few years!

    4: The correct posture for trying out the sleep

    In fact, there is no correct position, suitable for you is the best ~ whether you like to lie flat, side or sleep on your back, according to your usual sleeping position at home to try, the final experience is your usual night sleep feeling.

    It’s worth noting that during the test sleeping process, it’s important to find out if you have a need to turn over, as lying on a mattress that is difficult to turn over is as uncomfortable as turning over a turtle with its shell facing the ground…

    I would like to mention that different sleeping positions are also important for choosing a mattress.

    Sleeping on your back: sleeping on your back puts a lot of pressure on your body joints, so it is not recommended to sleep on your back, but you really like to sleep on your back, so the softer the mattress, the better, we recommend pure latex, memory foam mattresses.

    Side sleeper: side sleeper needs good support and support capacity, so the same price priority independent pocket spring mattress, and then according to personal needs to select the filling material.

    Lie flat: recognized as the healthiest sleeping position, the human spine is “S” shape, in the waist position is concave, so in the selection of mattress to choose a high degree of body fit, strong support, so as to reduce the pressure on the waist. Don’t spit on the drawing! Just get it!!!

    5: Record your experience

    Going to the store to try to sleep is certainly a lot of many, that your brain is basically confused. You may only remember the last mattress you try to sleep on, so record the feeling of each mattress you have tried to sleep on, while remembering clearly the brand, configuration, including price.

    This is not only convenient for you to go home and take your time to consider, but also put together when analyzing, will also be easy to find which mattress is most suitable for you, which mattress is the most cost-effective ~

    Sixth: other small details of the test sleep

    When trying to sleep, try to ensure that the neck and the pillow fit together, so that there will be a better sleeping experience Oh!

    If you have a partner with you when you try to sleep, you can do a little test, let your partner put both hands under the shoulders and waist at the same time, if the pressure of the two hands feel very close, it means that the mattress for you to fit better, the softness is more suitable~.

    This is all we have to say about the process of trying out a mattress. Next, we’ll talk to you about how to make sure you’re trying out a good mattress in the process of trying out a mattress, which is an important part of your recording experience.

    1) First of all, remember this eight-letter truth: “soft but not collapsing, hard but not hanging”.

    This simply means that the mattress is soft, but you don’t sink into it while you sleep, resulting in your body’s spine not being kept in a natural state, which is reflected in how tired you will feel at the end of your trial sleep.

    Similarly, although the mattress is hard, it does not leave your waist hanging, which leads to excessive pressure on the waist and produces discomfort. As reflected in the trial sleep process, you can put your hand under your waist and feel whether the fit is tight.

    2) Feel the support, wrapping, breathable, and anti-disturbance.

    Support is well understood, the whole mattress on your body supports, as I often hang on the mouth of “waist up, buttocks sink”, a good mattress often on the waist of the support is very good ~.

    To experience the feeling of wrapping, you lie on the mattress, and then carefully feel the pressure feedback of the mattress on each part of the body, the stronger the feeling of wrapping, the better the fit.

    A mattress that is not breathable can easily lead to mold or mites inside the mattress, so breathability is important. You can sleep a little longer on a test bed and then feel if heat builds up on your back. This method may be a bit one-sided, but a test sleep is not a big problem!

    A good mattress to take into account the two people sleeping when turning over each other do not affect each other, that is to say, good anti-disturbance mattress, no matter how you lie in bed to make, your bed partner almost no feeling, if you usually sleep shallow, then in the process of trying to sleep to focus on feeling the anti-disturbance performance of the mattress.

    A good top mattress is still worth your time and effort to find out more about it.

  • How to buy SweetNight Dreamy Hybrid Mattress soft and hard double-sided mattress.

    Preface

    This March, on the occasion of World Sleep Day, I took advantage of the event day to purchase the SweetNight Dreamy Hybrid Mattress in order to keep my daughter-in-law, who is pregnant and about to give birth, from rolling over and moving around more due to her weight gain, as well as the various “rolls around” and “flies around” when the older baby sleeps, which affects my sleep.

    SweetNight Dreamy Hybrid Mattress soft to the touch but not loose, full-fitting body shape characteristics, said sleeping on the clouds may not believe many people, but the feeling of floating on the water when backstroke many people should be very familiar, lying on the mattress is similar to so, very wonderful. During the period no matter how the child turns over or jumping, will not have an impact on me, sleep quality is therefore greatly improved, after the hands of the family unanimously affirmed.

    SweetNight Dreamy Hybrid Mattress pad in addition to sleeping comfort, its products also have the European standard 0 pollution, OEKO-TEX Standard 100 Class I certified fabrics and anti-bacterial properties, can be applied to textiles for infants under 3 years old, but also let me this two children’s daddy a lot of peace of mind.

    Brand

    First acquaintance with SweetNight Dreamy Hybrid Mattress or last year at the time of the home fair, when trying to sleep on its memory foam mattresses feel very unusual, fit and support are very strong, the experience is very good. Through the SweetNight China station information, found that the brand has actually entered the country for some time, the product has won the European seven countries Consumer Council mattress champion.

    SweetNight R & D staff around the world, a variety of certifications and international awards, has been sold to more than 26 countries around the world 1.5 million + mattresses, reputation and quality do not need to question.

    Recently my parents’ old spring mattress started to creak, so I was ready to upgrade them to a major international brand mattress before the winter. In fact, after I got the SweetNight Dreamy Hybrid Mattress, I let them try it out and they rated the SweetNight very highly overall. But for the elderly, SweetNight is mainly aimed at full-fitting sleep support, which for parents used to sleeping on hard beds, will feel slightly soft.

    When I saw the SweetNight Dreamy Hybrid Mattress, the above problem was easily solved. Dortmund is a double-sided soft and adjustable mattress with 7-zone independent silent pocket structure, taking into account the needs of more, and inherited a lot of the SweetNight Dreamy Hybrid’s black technology.

    At the beginning of the year when I bought SweetNight Dreamy Hybrid, the price advantage is greater is to buy in China, but 1.8 * 2 m size is not in stock, 2 m * 2 m is in stock (German guy’s bed are so big?), but the domestic universal bed can not be put, can not place an order.

    After seeing the comments that the price of the official website of Australia is also good, but the risk of transit during the epidemic and the urgency of the time requirements, can only be transferred to a sufficient supply of SweetNighta overseas flagship store placed an order. After providing the identity information needed for customs clearance is also waiting for about ten days

    The SweetNight Dreamy Hybrid Mattress cannot be folded and shipped like my previous SweetNight Dreamy Hybrid Mattress because it has a 7-zone solo pocket spring. The good thing is that it is delivered to your door, plus three layers of protective packaging, but do not worry about the process of express shipping.

    Tear open the film packaging, the mattress does not have any pungent smell. The SweeNight mattress has two sizes to choose from, and I picked up the 1.8m size, which matches perfectly with my parents’ solid wood bed.

    The SweetNight Dreamy Hybrid Mattress has two different firmnesses, A-side and B-side, but no specific markings are made, well by pressing on the mattress as well as the sides. `

    SweetNight Dreamy Hybrid Mattress comes with a protective fabric on the surface, which is made of Coolmax fabric, a patented high-tech fiber.

    Coolmax is a high-performance fabric, through the four pipeline fibers can be sweat and moisture from the surface of the mattress and disperse in all directions, bringing the benefits of faster drying and balance the moisture in the body, always keep the skin dry and comfortable.

    It is very warm to the touch, contact with the skin without sticky (zhan) sticky (nian) feeling, as if the mattress itself will breathe, very comfortable.

    The side of the dark gray is 3D breathable mesh fabric, so that the entire mattress breathability to further enhance.

    SweetNight Dreamy Hybrid Mattress edge area is prone to deformation, with rubber edge sponge and edge steel (about 5cm inside the edge of the position) to do two protection, to avoid the edge of the mattress deformation extended service life. Traditional mattress, used to do directly in the outer extension of the steel edge, bump is really painful, in addition to no sponge cushion, also easy to deformation.

    SweetNight Dreamy Hybrid Mattress side with double 360 ° zipper, the fabric can be completely disassembled, and then put into the washing machine to clean. This feature is particularly suitable for families with children at home, my previous mattress by children after bedwetting, that is a problem, can only be wiped with water, the smell does not dissipate over time.

    The SweetNight Dreamy Hybrid Mattress has a 0 pollution feature, so families with pregnant women and newborns don’t have to worry.

    With this feature, it also allows me to take a better look at the inner workings of this mattress.

    SweetNight Dreamy Hybrid MattressA side is made of MDI non-temperature sensitive pressure-release memory foam and egg-shaped foam. We may have heard of memory foam, but not necessarily heard of non-temperature-sensitive pressure-release memory foam. The early years of memory foam development due to the chemical reaction of the foaming process is incomplete, and there is no way to solve the problem of molecular activity, or macromolecular structure, will be very sensitive to the ambient temperature, when the temperature is low, the hardness will increase significantly. The new generation of MDI technology for material foaming will be more complete, so it can react into a more delicate small molecule structure, which makes the molecules less sensitive to temperature, all season can bring a soft and comfortable sleep.

    MDI technology raw materials are currently only a few large international chemical manufacturers can produce, the purchase price is very high. sweetNight Dreamy Hybrid Mattress using a 2cm thick European MDI memory foam technology, sponge molecular structure is more delicate, better resilience. Plus it has a large number of concave and convex egg-shaped sponges distributed underneath, strengthening both

    SweetNight Dreamy Hybrid Mattress B side for Airgocell sponge and HRX high-density cotton layer. Blue Airgocell foam layer is the use of gel-like structure and achieve a very high point elasticity of the new material, won the German patent. Its porous open structure ensures that the air can circulate freely in it to achieve the ability to regulate temperature and humidity control, and the trouble of being awakened by heat will never return. It also plays a role in dispersing the weight of the whole body, relieving the pressure of various parts of the body and protecting the spine.

    And the green HRX high support foam, also used in my previous SweetNight Dreamy Hybrid Mattress, mainly to provide higher support for the body, which is the reason for the Dortmund B-side hardness strengthening as well as better turning.

    The B side is faster rebounding compared to the A side, there is a higher degree of support, sleeping feeling will be slightly softer than the traditional pure brown pad, but will not have the problem of formaldehyde generated by the bonding of the brown pad.

    Through the side opening can be observed SweetNight Dreamy Hybrid Mattress has a 7-zone independent pocketed silent springs. Independent spring to ensure that the Shu sleep up and turn will not interfere with the pillow, before the pressure test, I was surprised to find that this mattress is not a trace of noise, the original is its credit.

    SweetNight Dreamy Hybrid Mattress 7-zone springs are also divided into two types (1.8m and 2.0m), treating the head, neck, shoulders, waist, hips, legs and feet separately, so that the body can enjoy a full range of support and pressure relief.

    Use experience

    After all the preceding, experience the effect is the king.

    The first experience is the A side of the SweetNight Dreamy Hybrid Mattress. It is a bit like the SweetNight Dreamy Hybrid Mattress I bought before, the whole body everywhere there is support no gap in the cavity, so that the body is more relaxed, as if people are wrapped in the mattress, in the waist and pressure reduction is reflected in the best way.

    76kg of footsteps, you can experience the softness of it, the mattress edge of the perimeter steel in the footsteps process has a strong support, much more stable than ordinary wire bed.

    B side of the hardness will be slightly harder, similar to the softness of latex mattresses. With Airgocell foam and HRX high-density cotton layer, it fits very well, any part of the body has effective support, turning over is also easier, more in line with my parents’ preferences.

    The same foot stepping demonstration, you can experience the difference between the two sides of soft and hard. But no matter which side, you step on it, it is like walking on the snow a footprint, there is almost no collapse around, just the A side and B side of the different depths.

    SweetNight Dreamy Hybrid Mattress turn over anti-disturbance ability, I have demonstrated in the preamble part of the article, the A side of the sleep feeling similar to this. This time the SweetNight Dreamy Hybrid Mattress B side has increased hardness, so I am more concerned about its ability to roll over and resist disturbance. After the actual test, even the harder B side. When turning over on the B side, the fruit around the body does not have any vibration at all, especially amazing. The mattress also reduces rolling resistance by design, and its unique support helps the body move and flip effortlessly.

    The difference between the two sides can also be clearly seen in the slow-motion reaction to the bouncing of a grapefruit weighing about 1.5kg. the cushioning performance of the A side is stronger and quickly absorbs the force of the grapefruit as it falls, leaving it softly resting on the mattress.

    B side is more rigid performance, grapefruit fall first will have a clear bounce response, stronger spine support also shows.

    learn moe..

通过 WordPress.com 设计一个这样的站点
从这里开始